Description
Dosage
32 fl oz per 10,000 gallons of water for phosphate levels over 1000 ppb.
Directions
- Clean or backwash filter. Make sure DE filters are properly clean and charged with DE before adding product.
- For phosphate levels over 1000ppb, add 32 oz. (1L) per 10,000 gallons. DO NOT add more than 48 oz. (1.5L or half a bottle) at a time.
- Shake bottle well prior to application. With circulation pump running, add the recommended dose to skimmer.
- Some clouding may occur. Run the pump and filter for 48 hours continuously without backwashing or cleaning.
- After 48 hours, vacuum to filter.
- Backwash or clean filter.
- Retest the phosphate level. Repeat steps 1-6 if necessary.
For DE & Cartridge Filters:
Do not add more than 48 oz at a time. If more than 48 oz is needed to treat phosphate level, be sure to clean or backwash the filter between treatments.<.p>
Important:
Retest water after each completed treatment. Repeat until phosphate level is below 100ppb.
Note:
Algae mush be treated prior to testing and treating phosphates. Chlorine must be under 5ppm before testing for phosphates.